 |
| Quantity: | |
|---|---|
HC-PA1
HONGCHENG
Decoration Eucalyptus Plywood with Customized Sized for Australia and New Zealand
Face/back: 0.9mm red/yellow hardwood veneer
Core: orginal whole hardwood veneer
Standard: AS/NZS2269, F22
Glue: Dynea phenolic resin, "A" bond glue lines
Thickness: 4mm 3 layers
size: 2440x900mm, 2440x1200mm, 2745x1200mm,2745x900mm,3050x1200mm,3050x900mm
Color: red or yellow natural timber color
Application: Structural bracing and Non-structural
Packing: 150pcs/pallet
Uncoated high appearance surface suitable for clear, stain and paint finishes
Contains a second void-free layer under surface veneer increasing protection from moisture bubbles and high point loads
HC Wood Structural Plywood has been manufactured at our plant in China, for in excess of 15 years and has been used successfully in the Asia, Australia and New Zealand. For domestic and light commercial structural and decorative applications HC wood manufactures structural plywood in a range of widths, lengths, thickness and grades to AS/NZS2269 from Newzealand and Russia soured plantation Radiata Pine and Larch.
Structural plywood is for use in all permanent structural and engineered applications.
A Bond is durable and permanent under conditions of full weather exposure and long term stress.
Structural plywood should be preservative treated to ensure it lasts its full service life as it is manufactured from a range of hardwood and softwood timber species.
For termite and rot resistance, plywood can be treated to H2, H3 or H4 standards. Or for a lower cost alternative can be manufactured with a bifenthrin glue line additive which provides termite resistance but is only suitable for use south of the tropic of Capricorn.
Decoration Eucalyptus Plywood with Customized Sized for Australia and New Zealand
Face/back: 0.9mm red/yellow hardwood veneer
Core: orginal whole hardwood veneer
Standard: AS/NZS2269, F22
Glue: Dynea phenolic resin, "A" bond glue lines
Thickness: 4mm 3 layers
size: 2440x900mm, 2440x1200mm, 2745x1200mm,2745x900mm,3050x1200mm,3050x900mm
Color: red or yellow natural timber color
Application: Structural bracing and Non-structural
Packing: 150pcs/pallet
Uncoated high appearance surface suitable for clear, stain and paint finishes
Contains a second void-free layer under surface veneer increasing protection from moisture bubbles and high point loads
HC Wood Structural Plywood has been manufactured at our plant in China, for in excess of 15 years and has been used successfully in the Asia, Australia and New Zealand. For domestic and light commercial structural and decorative applications HC wood manufactures structural plywood in a range of widths, lengths, thickness and grades to AS/NZS2269 from Newzealand and Russia soured plantation Radiata Pine and Larch.
Structural plywood is for use in all permanent structural and engineered applications.
A Bond is durable and permanent under conditions of full weather exposure and long term stress.
Structural plywood should be preservative treated to ensure it lasts its full service life as it is manufactured from a range of hardwood and softwood timber species.
For termite and rot resistance, plywood can be treated to H2, H3 or H4 standards. Or for a lower cost alternative can be manufactured with a bifenthrin glue line additive which provides termite resistance but is only suitable for use south of the tropic of Capricorn.